View CPH5503_219740.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : ENN6918A
CPH5503
NPN Epitaxial Planar Silicon Transistor
CPH5503
DC / DC Converter Applications
Applications
*
Package Dimensions
unit : mm 2162
2.9 5 4 3
0.6
Relay drivers, lamp drivers, motor drivers, strobes.
Features
*
[CPH5503]
0.2
0.15
*
*
Composite type with two NPN transistors contained in one package facilitating high-density mounting. The two chips contained are equivalent to the CPH3209. Ultrasmall package permitting applied sets to be made small and slim.(0.9mm)
1 0.95
2 0.4
0.6
1.6
2.8
0.05
1 : Collector(TR1) 2 : Collector(TR2) 3 : Base(TR2) 4 : Emitter Common 5 : Base(TR1) SANYO : CPH5
0.2
0.4
Specifications
Absolute Maximum Ratings at Ta=25C
Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Collector Dissipation Total Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP PC PT Tj Tstg Mounted on a ceramic board (600mm2!0.8mm) Mounted on a ceramic board (600mm2!0.8mm) Conditions
0.7
0.9
Ratings 40 30 5 3 5 0.9 1.2 150 --55 to +150
Unit V V V A A W W C C
Electrical Characteristics at Ta=25C
Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob Conditions VCB=30V, IE=0 VEB=4V, IC=0 VCE=2V, IC=500mA VCE=10V, IC=500mA VCB=10V, f=1MHz Ratings min typ max 0.1 0.1 200 450 20 560 MHz pF Unit A A
Marking : EC
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
D0301 TS IM TA-3530 / 22001 TS IM TA-3127 No.6918-1/4 GI IM
CPH5503
Continued from preceding page.
Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol VCE(sat) VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO ton tstg tf Conditions IC=1.5A, IB=30mA IC=3A, IB=60mA IC=1.5A, IB=30mA IC=10A, IE=0 IC=1mA, RBE= IE=10A, IC=0 See specified Test Circuit See specified Test Circuit See specified Test Circuit 40 30 5 30 300 15 Ratings min typ 120 220 0.85 max 180 330 1.2 Unit mV mV V V V V ns ns ns
Switching Time Test Circuit
PW=20s D.C.1% INPUT IB1 OUTPUT IB2 VR 50 + 100F VBE= --5V IC=20IB1= --20IB2=500mA + 470F VCC=12V RB
Electrical Connection
B1 EC B2
RL 24
C1 C2
50mA 40mA 30 mA
2.0
IC -- VCE
8.0
10
3.0
IC -- VBE
VCE=2V
mA
6.0m
m
A
A
2.5
1.6
Collector Current, IC -- A
4.0mA
20mA
Collector Current, IC -- A
2.0
1.2
1.5
Ta=75C
0 0.2 0.4 0.6
0.8
2.0mA
1.0
0.4
0.5
0 0 200 400 600 800
IB=0
1000 IT03042
0 0.8 1.0 IT03043
Collector-to-Emitter Voltage, VCE -- mV
1000
Base-to-Emitter Voltage, VBE -- V
1.0 7 5
hFE -- IC
VCE=2V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V
VCE(sat) -- IC
7
3 2 0.1 7 5 3 2 0.01 7 5 3 2 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 IT03047
DC Current Gain, hFE
5
Ta=75C
3
25C --25C
C 75 Ta= 5C --2
C 25
2
100 0.01
2
3
5 7 0.1
2
3
5 7 1.0
2
3
Collector Current, IC -- A
5 7 10 IT03044
0.001 0.01
Collector Current, IC -- A
25C --25C
IC / IB=20
No.6918-2/4
CPH5503
10 7 5
VCE(sat) -- IC
IC / IB=50 Base-to-Emitter Saturation Voltage, VBE(sat) -- V
10 7 5 3 2
VBE(sat) -- IC
IC / IB=50
Collector-to-Emitter Saturation Voltage, VCE(sat) -- V
3 2
1.0 7 5 3 2
1.0 7 5 3 2
Ta= --25C
0.1 7 5 3 2
C 75 Ta= 5C --2
75C
25C
C 25
2 3 5 7 0.1 2 3 5 7 1.0 2 3
0.01 0.01
Collector Current, IC -- A
100
5 7 10 IT03048
0.1 0.01
2
3
5 7 0.1
2
3
5 7 1.0
2
3
Collector Current, IC -- A
1000
5 7 10 IT03049
Cob -- VCB
f T -- IC
VCE=10V
f=1MHz Output Capacitance, Cob -- pF
7
Gain-Bandwidth Product, f T -- MHz
2 3 5 7 2 3 5 IT03046
7 5
5
3 2
3
100 7 5 3 10
2
10 1.0
10
2
3
5
7 100
2
3
5
7 1000
2
3
Collector-to-Base Voltage, VCB -- V
10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01
ASO
Collector Current, IC -- mA
1.4
IT03045
PC -- Ta
ICP=5A Collector Dissipation, PC -- W IC=3A
10
1m
s
1.2
0 s 50
Collector Current, IC -- A
10
s 0
DC
10
0m
ms
1.0 0.9 0.8
op
s
To t
al
era
tio
n
1u
0.6
Di
ss
nit
ip
ati
on
0.4
Ta=25C Single pulse Mounted on a ceramic board(600mm2!0.8mm) 1unit
2 3 5 7 1.0 2 3 5 7 10 2 3 5
0.2 0 0
Mounted on a ceramic board(600mm2!0.8mm)
20 40 60 80 100 120 140 160
0.1
Collector-to-Emitter Voltage, VCE -- V
1.0
IT03050
Ambient Temperature, Ta -- C
IT03051
PC(TR2) -- PC(TR1)
Collector Dissipation, PC(TR2) -- W
0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0
Mounted on a ceramic board(600mm2!0.8mm)
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Collector Dissipation, PC(TR1) -- W
IT03052
No.6918-3/4
CPH5503
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2001. Specifications and information herein are subject to change without notice.
PS No.6918-4/4

▲Up To Search▲

Price & Availability of CPH5503

	To Download CPH5503 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .